Icom IC-F6062D Operating Manual

Also see for IC-F5062D: Instruction manual Instruction manual Instruction manual Instructions

Contents

Icom IC-F6062D Operating Manual Manual pdf 7 page image

42BIIS 1200 OPERATION12345678910111213141516D Receiving a Group callq When a Group call is received:• Rings sound.• “ ” appears and the mute is released.• “ ” appears or blinks, depending on the pre-programmed set-tings.• The group ID (or name) and the calling station’s ID (or name)blink.4 0 0 11 2 3 4Appears or blinksAppearsGroup ID Calling station’s IDw While holding down [PTT], speak into the microphone atyour normal voice level.NOTE: Only one station is allowed to speak at the sametime.e Release [PTT] to receive.r After the communication is finished, push [Moni (Audi)] tosend a ‘Clear down’ signal to terminate the connection.• Either station can send a ‘Clear down’ signal.• “ ” disappears, “CLR DOWN” appears for approximately 2seconds, and the transceiver automatically returns to thestand-by mode.D Receiving an Emergency callq When an Emergency call is received:• Rings sound.• “Emergency” and the calling station’s ID (or name) blink.• The transceiver automatically transmits an acknowledgement tothe calling station.E m e r g e n c y1 1 1 1Calling station’s IDw Push [Moni (Audi)] to return to the stand-by mode.