Icom IC-F8100 Instruction Manual

Also see for IC-F8100: Instruction manual Instruction manual Service manual Service manual Manual

244 SELCALL/ALE OPERATIONThe Channel Test call allows the user determine thesignal quality between your transceiver and specifictransceiver before an individual/group call. The Chan-nel Test call is also used for checking the channel be-fore sending Phone call.• Sending Channel Test callq On the Memory Channel display, push [ ] toenter the Call select menu.w Push [t](§) or [u](§§§) to select the Call to “SEL-CALL,” then push [ ] to enter the Selcall menu.e Push [t](§) or [u](§§§) to select the Call type to“CHANNEL TEST.”• “SELECTIVE,” “PHONE,” “MESSAGE,” “SEND POSI-TION,” “GET POSITION,” “GET STATUS,” “EMERGENCY”and “CHANNEL TEST” are selectable.r Push [ ] to forward to the next screen.• Push [HOME] to return to the previous screen.❍ Call ID inputPush numeral keys to enter the Call ID.• Push [8] to delete the number.• This Call ID is not stored in the Call ID list.❍ Call ID selection➥ Push [List](§ § ) to call the list selectionmode.➥ Push [t](§) or [u](§§§) to select the Call ID.• Push [Edit](§§) to return to the direct input mode.t Push [ ] to forward to the next screen.• Push [HOME] to return to the previous screen.❍ Network selectionPush [t](§) or [u](§§§) to select the Network.y Push [ ] to forward to the next screen.• Push [HOME] to return to the previous screen.❍ Self ID selectionPush [t](§) or [u](§§§) to select the Self ID.❍ Self ID input➥ Push [Edit](§§) to call the direct input mode.➥ Push numeral keys to enter the Self ID.• Push [8] to delete the number.• This Self ID is overwritten or stored in the Self ID list.• Push [List](§§) to return to the list selection mode.u Push [ ] to enter the Channel Menu, and thenpush [t](§) or [u](§§§) to select the desired oper-ating channel.• Push [HOME] to return to the Selcall menu.i Push [ ] to transmit the Channel Test call. Thecall is stored in the Call Out memory.• While calling, push [PTT] to cancel the call.You can also transmit the Channel test call on theSelcall Address display. In this case, you can skipabove steps q to t, after selecting the ChannelTest call address.ï Channel Test call