Icom IC-F8100 Instruction Manual

Also see for IC-F8100: Instruction manual Instruction manual Service manual Service manual Manual

477CONNECTION AND INSTALLATION1234567891011121314151617 Quick Referencet Unscrew the 4 rear plate screws, then remove theRear plates from both the Front panel and Main unitattachments.Rear plate *This illustrationshows the descrip-tion for the Mainunit attachment.Main unit attachmenty Connect one of the Separation cable OPC-607,OPC-608, OPC-609 or OPC-726 to the Main unitattachment as shown below.After the cable connection, replace the removedrear plate and the 4 screws.• The separation cable can be inserted into either the left orright grooves as desired on the back of the attachment.Use the suppliedscrew (M3 × 8).Rear plateMain unit attachmentCable grooveSeparation cableu Connect the connection cable (coming from theRMK-6) as shown below.Then tighten the 4 hex socket screws.i Connect the other side of the Separation cable tothe Front panel attachment as shown below.After the cable connection, replace the removedrear plate and the 4 screws.• The separation cable can be inserted into either the left orright grooves as desired on the back of the attachment.Rear plateFront panel attachmentCable grooveSeparation cableUse the suppliedscrew (M3 × 8).o Connect the connection cable (coming from theRMK-6) as shown below.Then tighten the 4 hex socket screws.