Icom IC-F8100 Instruction Manual

Also see for IC-F8100: Instruction manual Instruction manual Service manual Service manual Manual

853SPECIFICATIONS1234567891011121314151617 Quick ReferenceD General• Frequency coverage : (Unit: MHz)Receive 0.5–29.9999Transmit 1.6–29.9999• Type of emission : J3E (USB/LSB), A1A (CW),(depends on version) A3E (AM), F1B (FSK)• No. of memory Ch. : 500 channels (max.)• Usable temp. range : –30˚C to +60˚C• Frequency stability : ±0.3 ppm (–30˚C to +60˚C)• Power supply : 13.8 V DC (negative ground)(11.73–15.87 V DC)• Current drain :Transmit (typical) at max. power 28 AReceive at max. audio 3.0 A• Dimensions (projections not incl.):Main/Front package 62(W)×174(H)×259(D) mm• Weight (approx.) :Main/Front package 3.8 kgD Transceiver• Output power : (typical)J3E/A1A HIGH 125 W p-pMID 50 W p-pLOW 10 W p-pA3E HIGH 30 W CarrierMID 12.5 W CarrierLOW 3 W CarrierJ3E/A1A HIGH 75 W p-pMID 50 W p-pLOW 10 W p-p• Spurious emission : 64 dB (typical)below peak output power• Carrier suppression : 50 dBbelow peak output power• Unwanted sideband suppression :400 Hz 55 dBbelow peak output power1 kHz 65 dBbelow peak output powerD Receiver• Sensitivity:J3E (Pre Amp ON)(0.5–1.5999 MHz) 14 dBμV (10 dB S/N)(1.6–29.9999 MHz) –14 dBμV (10 dB S/N)A3E(0.5–1.5999 MHz) 22 dBμV (10 dB S/N)(1.6–29.9999 MHz) 6 dBμV (10 dB S/N)• Spurious response rejection ratio:More than 70 dB• AF output power : (at 13.8 V DC)More than 4.0 W at 10%distortion with a 4 Ω load• Clarifier range : ±200 HzAll stated specifications are typical and subject to change without notice or obligation.