Icom IC-F8101 Instruction Manual

Also see for IC-F8101: Service manual Service manual Instruction manual

102 BASIC OPERATIONIn the VFO mode, you can set a desired operating fre-quency, operating mode or split frequency function.NOTE:• The VFO mode operation can be disabled by the“VFO Mode” item of “Setmode.”(Main Menu > Setmode > Config)• While in the VFO mode, the Selcall, ALE features,Scan function or the Emergency key cannot beused.• Entering the VFO modePushq [8] to enter the Main Menu screen.Pushw [r] or [s] to select “VFO,” and then push[4].• Frequency settingPushq [A/B](§§) to select VFO A or VFO B.Pushw [t](§) or [u](§§§) to move the cursor to se-lect the desired digit to be changed.• The cursor is displayed below the selected digit.Pushe [r] or [s] to change the digit.• Direct frequency settingPushq [A/B](§§) to select VFO A or VFO B.Hold downw [4] for 1 second to enter the direct fre-quency input mode.• The previously entered frequency blinks.Push the keypad to enter the desired frequency.e• Push [M] to enter the decimal point.• Push [8] to delete the number.• Push [t](§) or [u](§§§) to move the cursor.Pushr [4] to save the frequency and exit.[��] [��][�]/Keypad• Turning ON the Split frequency functionPushq [8] to enter the Main Menu screen.Select the “VFO Split” item of “Setmode.”wq Push [r] or [s] to select the item, and thenpush [4] to open the screen.(Setmode > Config)w Push [r] or [s] to select “VFO Split,” and thenhold down [4] for 1 second.Pushe [r] or [s] to turn ON the function.• If desired, hold down [Default](§§) for 1 second to re-turn to the default setting.Pushr [4] to save the setting, and return to the pre-vious screen.Pusht [8] one or more times to exit the Main Menuscreen.Enter the VFO mode. (See details to the left.)yPushu [A/B](§§) to select VFO A or VFO B, and sep-arately set the receive and transmit frequencies.• The TX frequency appears below the RX frequency.• Push [A/B](§§) changes the VFOs between transmitand receive.• Hold down [A/B](§§) for 1 second to equalize the trans-mit frequency to the receive frequency.• To turn OFF the Split frequency function, set the “VFOSplit” item of “Setmode.” to “OFF.”(Main Menu > Setmode > Config)■ VFO operation