Icom IC-F8101 Instruction Manual

Also see for IC-F8101: Service manual Service manual Instruction manual

304 SELCALL/ALE OPERATIONAutomatically establish a communication link by usingthe ALE table.• Sending an Individual callHold downq [ ] for 1 second to enter the Networkselection screen.Pushw [r] or [s] to select the desired Network, andthen push [ ].• The Networks that belong to the ALE system must beselected.Pushe [r] or [s] to select the Call Type to “Individ-ual.”• “Individual,” “NET Call,” “Sounding” and “AMD” are select-able.Pushr [r] or [s] to select the Individual ID, and thenpush [ ].• Only the ID that belong to the selected Network in stepw, are displayed.Pusht [r] or [s] to select the Self ID, then push[ ].• Only the ID that belong to the selected Network in stepw, are displayed.Pushy [r] or [s] to select the Channel.• Only the channels that belong to the selected Network instep w, are displayed.• If is selected, the transceiver sequentially trans-mits channels that belong to the Network.Pushu [ ] to transmit the Individual call. The call isstored in the Call Out memory.• While calling, push [PTT] to cancel the call.• After an ALE callAfter an ALE call is finished, push➥ [ ] to transmitthe disconnect call.• If the “Auto Start Type” item of “Setmode” is set to “Scan”or “Termination,” the Call automatically disconnects afterthe Auto Start Wait Time period has past with no opera-tion. (Setmode > Call)• Sending a Net callHold downq [ ] for 1 second to enter the Networkselection screen.Pushw [r] or [s] to select the desired Network, andthen push [ ].• The Networks that belong to the ALE system must beselected.Pushe [r] or [s] to select the Call Type to “NETCall.”• “Individual,” “NET Call,” “Sounding” and “AMD” are select-able.Pushr [r] or [s] to select the NET ID, and then push[ ].• Only the ID that belong to the selected Network in stepw, are displayed.Pusht [r] or [s] to select the Self ID, then push[ ].• Only the ID that belong to the selected Network in stepw, are displayed.Pushy [r] or [s] to select the Channel.• Only the channels that belong to the selected Network instep w, are displayed.• If is selected, the transceiver sequentially trans-mits channels that belong to the Network.Pushu [ ] to transmit the NET Call. The call isstored in the Call Out memory.• While calling, push [PTT] to cancel the call.ALE callD