133RECEIVE AND TRANSMIT3Speech ProcessorDThe IC-F8101 has a built-in, low distortion SpeechProcessor circuit. This circuit increases your averagetalk power in the SSB mode, and is especially usefulwhen the receiving station is having difficulty hearingyour audio.[Default]/Pushq [8] to enter the Main Menu screen.Select the “Speech Processor” item of “Setmode.”wq Push [r] or [s] to select the item, and thenpush [4] to open the screen.(Setmode > Config)w Push [r] or [s] to select “Speech Processor,”and then hold down [4] for 1 second.Pushe [r] or [s] to turn ON the function.• If desired, hold down [Default](§§) for 1 second to re-turn to the default setting.Pushr [4] to save the setting, and return to the pre-vious screen.• If desired, adjust the Speech Processor Level. See thenext topic for details.Pusht [8] one or more times to exit.Pushy [MODE](3) one or more times to select theUSB or LSB mode.Hold downu [PTT] on the microphone, and speak ata normal voice level.Speech Processor LevelDThe Speech Processor level must be properly adjust-ed so that your signal is not distorted when transmit-ted.[Default]/Pushq [8] to enter the Main Menu screen.Select the “Speech Processor Level” item of “Set-wmode.”q Push [r] or [s] to select the item, and thenpush [4] to open the screen.(Setmode > Config)w Push [r] or [s] to select “Speech ProcessorLevel” and then hold down [4] for 1 second.Pushe [r] or [s] to adjust the desired level to be-tween 0 and 10.• If desired, hold down [Default](§§) for 1 second to re-turn to the default setting.Pushr [4] to save the setting, and return to the pre-vious screen.Pusht [8] one or more times to exit.