Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Service manual Instruction manual Service manual

Contents

Icom IC-M506 Instruction Manual Manual pdf 14 page image

52 PANEL DESCRIPTIONFunction display■t CALL CHANNEL ICON (p. 9)Appears when the Call channel is selected.y DUPLEX ICON (p. 10)Appears when a duplex channel is selected.u FAVORITE CHANNEL ICON (p. 17)Appears when a Favorite (Tag) channel is selected.i MESSAGE ICONBlinks when there is an unread DSC message.o GPS ICONStays ON when the GPS receiver is activated and valid➥position data is received.Blinks when invalid position data is being received.➥!0 SWITCH ICON (p. 69)Appears when the “CH 16 SWITCH” in DSC Settings is setto OFF.!1 LOW BATTERY ICONBlinks when the battery voltage drops to approximately10.8 V DC or less.!2 CHANNEL NUMBER READOUTShows the selected operating channel number.• When a simplex channel is selected, “A” or “B” appears.!3 CHANNEL NAME FIELDThe channel name appears, if programmed. (p. 13)!4!6!7q w ie tr !0y ou!1!3!8!9@0!5!2q BUSY/TRANSMIT ICON (pp. 11, 12)The “➥ ” icon appears when receiving a signal orwhen the squelch is open.The “➥ ” icon appears while transmitting.w POWER ICON (p. 11)The “25W” icon appears when high power is selected.➥The “1W” icon appears when low power is selected.➥e RX HAILER ICON (p. 75)Appears while in the RX Hailer mode.r CHANNEL GROUP ICON (p. 10)The selected channel group icon, USA “USA,” Interna-➥tional “INT” or Canadian “CAN” appears.➥ The “WX” icon appears when the weather channel isselected.