Icom IC-M506 Instruction Manual

Also see for IC-M506: Specifications Instruction manual Service manual Instruction manual Service manual

Contents

Icom IC-M506 Instruction Manual Manual pdf 28 page image

19DSC OPERATION7DSC address ID■Programming Individual IDDA total of 100 DSC address IDs can be programmed and as-signed a name of up to 10 characters.Enter “INDIVIDUAL ID” in the DSC SETTINGS menu.qPush [ADD].w• The “INDIVIDUAL ID” program screen is displayed.Enter a desired individual ID in the following way:e• Select a desired number using [Y]/[Z]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.• Push [EXIT] to return to the normal operating mode.• Push [BACK] to return to the previous screen.The first digit is specified as ‘0’ for a Group ID.The first two digits are ‘0’ for any Coast station ID.r Repeat step e to enter all 9 digits.t After entering the 9 digit code, push [ENT] or dial to set it.• The ID name programming screen is displayed.y Enter a desired 10 digit ID name in the following way:• Select a desired character using [Y]/[Z]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.• Push [123], [!$?] or [ABC] to select a character group.u After entering the ID name, select “FINISH” using [Y]/[Z]/[Ω]/[≈], then push [ENT] to program it.• The “INDIVIDUAL ID” list screen is displayed.i Push [MENU] to exit the MENU screen.MENU ➪ DSC SET ➪ Individual ID(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)