offered by Busse-Yachtshop.com378SET MODE87Beep toneBeepScan typeScan typeScan resume timerScan timerDual/tri-watch of COMMANDMICDual/Tri COMMANDMICLCD contrastContrastRotate [CHANNEL] Push when using HM-134˘Scan Type˘Scan Timer˘Beep--Set Mode--˘Contrast˘Internal Speaker˘Dual/Tri COMMANDMIC˘Foghorn Frequency˘ExitFoghorn FrequencyFoghorn Frequency andInternal Speaker items arenot selectable when using HM-134. Set mode programmingSet mode is used to change the conditions of the trans-ceiver’s functions: scan type (normal or priority), scan resumetimer, dual/tri-watch of COMMANDMIC, transceiver’s beeptone, internal speaker, LCD contrast and automatic foghornfrequency.Available functions may differ depending on dealer setting.q Turn power OFF.w While pushing [16•C], turn power ON to enter set mode.e After the display appears, release [16•C].r Rotate [CHANNEL] to select the desired item, push [ENT].Or push [16•C] to select the item when using an optionalHM-134.t Rotate [CHANNEL] to select the desired condition of theitem. Use [Y]/[Z] when using an optional HM-134.y Rotate [CHANNEL] to select “Exit,” push [ENT] to exitset mode and returns to normal operation condition• SET MODE CONSTRUCTION