Icom IC-M601 Instruction Manual

Also see for IC-M601: Service manual Instruction manual Instruction manual

offered by Busse-Yachtshop.com4913HM-134 REMOTE-CONTROL MICROPHONE13➥ Enter set mode when pushed and held while turningpower ON. (pgs. 37, 57)t DIAL SWITCH [DIAL]➥ Selects and toggles the regular channels when pushedmomentarily. (pgs. 9, 52)➥ While pushing and holding [H/L], push to select channelgroup. (pgs. 9, 52)• International and U.S.A. channels are available for regularchannels. (depends on transceiver’s version)y DUAL-WATCH/INTERCOM SWITCH [DUAL•IC]➥ Push to start dualwatch or tri-watch. (pgs. 13, 56)➥ Push and hold for 1 sec. to activate the intercom func-tion. (pgs. 36, 58)➥ Push to stop dualwatch or tri-watch when either is acti-vated.➥ While pushing and holding the switch, you can call theIC-M601 in intercom mode. (pgs. 36, 58)u SQUELCH/MONITOR/LOCK SWITCH [SQL•MONI•L]➥ After pushing [SQL], [Y]/[Z] sets the squelch thresholdlevel. (p. 53)➥ Push and hold [SQL•MONI•L] for 1 sec. to turn the mon-itor function ON. (p. 54)➥ While pushing and holding [H/L], push [SQL•MONI•L] totoggle the microphone key lock function ON or OFF. (p.54)• “ T ” appears while key lock function is in use.• [PWR], [PTT], [VOL], [SQL] and [H/L] still function when themicrophone key lock function is turned ON.➥ Advances the cursor while in channel comment pro-gramming condition. (pgs. 11, 58)i VOLUME/DIMMER SWITCH [VOL•DIM]➥ After pushing [VOL], [Y]/[Z] adjusts the audio level.➥ Push and hold [VOL•DIM] for 1 sec. to adjust the bright-ness of the LCD and switch backlight. (p. 54)➥ Moves the cursor backward while in channel commentprogramming condition. (pgs. 11, 58)o TRANSMIT POWER SWITCH [H/L]➥ When pushed, toggles high and low power. (pgs. 10, 53)• Some channels are set to low power only.➥ While pushing and holding this switch, other switchesperform secondary functions.➥ Toggles the all key lock function ON or OFF whenpushed and held while turning power ON. (p. 54)• “ T ” flashes while the all key lock function is in use.• Only [PWR] and [PTT] function when the all key lock functionis in use.!0 SCAN SWITCH [SCAN•TAG] (pgs. 15, 57)➥ Starts and stops normal or priority scan when tag chan-nels are programmed.➥ Push and hold [SCAN•TAG] for 1 sec. to set the dis-played channel as a tag (scanned) channel.➥ While pushing and holding [H/L], push and hold for 3sec. to clear all tag channels.