133BASIC OPERATION Optional voice scrambler operationDD Activating the scramblerThe optional voice scrambler provides private communica-tions. In order to receive or send scrambled transmissionsyou must first activate the scrambler function. To activate thefunction, an optional UT-112 is necessary. See p. 53 for set-ting the scrambler unit. Ask your dealer for details.The scrambler function automatically turns OFF whenChannel 16 or 70 is selected.q Select an operating channel other than Channel 16 and 70.w Push [F], then push [0 SCRM] to turn the optional scram-bler function ON.• “SCRAM” appears.e To turn the scrambler function OFF, repeat step w.• “SCRAM” disappears.DD Programming scrambler codesThere are 32 codes (1 to 32) available for programming whenthe optional UT-112 is installed. In order to understand oneanother, all transceivers in your group must have the samescramble code. This function may not be available depend-ing on dealer setting.q Turn power OFF.w While pushing [16•9], turn power ON to enter set mode.e After the display appears, release [16•9].r Rotate [CHANNEL] to select the “Scrambler Code,”push [ENT].t Rotate [CHANNEL] to select the desired scrambler code.y Push [ENT] to set and exit the scrambler code item.u Rotate [CHANNEL] to select “Exit,” then push [ENT] toexit set mode.Enter set modePOWER+916ENT ENTSelect itemthen pushSelect codethen pushScrambler Code˘9˘7--Set Mode--˘5˘6˘8˘˘Scan Type˘Scan Timer--Set Mode--˘Internal Speaker˘Contrast˘Beep˘Dual/Tri COMMANDMIC˘WX Alert˘Internal Speaker˘Contrast--Set Mode--˘Scrambler Code˘Exit˘Scrambler Type˘Foghorn Frequency˘RF Attenuator[Example]: Programming scrambler code 8.3