216DSC OPERATION Position and Time programmingA distress call should include the ship’s position and timedata. If no GPS is connected, your position and UTC (Univer-sal Time Coordinated) time should be input manually. Theyare included automatically when a GPS receiver (NMEA0183ver. 2.0 or 3.01) is connected.➥This manual programming is not available when a GPSreceiver (NMEA0183 ver. 2.0 or 3.01) is connected.➥Manually programmed position/time data will be held for23.5 hours only.q Push [MENU] to enter the DSC menu.w Rotate [CHANNEL] to select “Position Input,”push [ENT].e Edit the digit of your latitude data directly with the keypad.• Push [6• ] to edit N; North latitude or [7• ] to editS; South latitude.• Rotate [CHANNEL] to move the cursor backward or forward.• Push [CE] to clear the position data.r Edit the digit of your longitude data directly with the keypad.• Push [3• ] to edit E; East longitude or [9• ] to editW; West longitude.• Rotate [CHANNEL] to move the cursor backward or forward.• Push [CE] to clear the position data.t Push [ENT] to set the position and advance to the timesetting condition.• Push [CLR] to abandon the setting and exit the condition.y Edit the digit of the current UTC time directly with the key-pad.• Rotate [CHANNEL] to move the cursor backward or forward.• Push [CE] to clear the time.u Push [ENT] to set the time.• Push [CLR] to abandon the setting and exit the condition.Input UTC time˘J__:__˘˘˘˘˘˘˘˘˘˘˘˘Null--DSC Menu--WXYDEFPRSMNOInput PositionLatitudeLongitude--DSC Menu--___°__.___W˘˘˘˘˘˘˘˘Null˘J_°__.___N˘˘˘˘˘˘˘˘Null6