6613 HM-127 REMOTE-CONTROL MICROPHONE Function displayq CHANNEL GROUP INDICATOR (pgs. 9, 70)Indicates whether an International (INT), U.S.A. (USA) orCanadian (CAN) channel is selected.w KEY LOCK INDICATOR (p. 72)➥ Appears while the key lock function is in use.➥ Flashes while the all key lock function is in use.e CHANNEL NUMBER READOUT➥ Indicates the selected operating channel number. “A”appears when a simplex channel is selected. “b” ap-pears when a receive only channel for a Canadian chan-nel group is selected. (pgs. 9, 70)➥ In set mode, indicates the selected condition. (pgs. 50,75)➥ “IC” appears during intercom mode. (pgs. 46, 76)r VOLUME INDICATOR (p. 71)Appears while audio output level is adjusted.t SQUELCH INDICATOR (p. 71)Appears while noise squelch level is adjusted.y CHANNEL NAME INDICATOR➥ Channel comment appears (and scrolls) if programmed.(pgs. 11, 76)➥ In set mode, indicates or scrolls the selected set modeitem. (pgs. 50, 75)u ATTENUATOR INDICATOR (pgs. 10, 71)Appears when the RF attenuator is in use.i SCRAMBLER INDICATOR (pgs. 13, 73)Appears when an optional voice scrambler is activated.o SCAN INDICATOR (pgs. 17, 74)➥ “SCAN” appears during normal scan.➥ “P SCAN” appears during priority scan.!0 PRIORITY CHANNEL INDICATOR➥ Indicates a priority channel during priority scan ordual/tri-watch. (pgs. 14, 17, 74)CALLWX ALTDUPP SCANSCRMLOCALTRIDUALLOWTAGCANUSAINTLTX BUSYVOLSQLqwrte!8 !7 !4!5 !3!2!1!0oiuy!6