Icom IC-Q7A Instruction Manual
Also see for IC-Q7A: Service manual
                                           | |
Contents
|
Setting a frequencyq Select VFO mode with [V/M].w Select the desired band with [BAND].e Rotate [DIAL] to change the frequency.• The frequency changes according to the preset tuning steps. Seethe right section for selecting the tuning step.• Rotate [DIAL] while pushing [FUNC] to change the frequency in 1MHz steps (default; p. 29).The 1 MHz tuning step (dial select step) can be set to 100kHz, 1 MHz or 10 MHz tuning steps in set mode. See p. 29for details. Setting a tuning stepTuning steps can be selected for each band. This transceiverhas 10 tuning steps as follows:• 5 kHz • 6.25 kHz • 10 kHz • 12.5 kHz • 15 kHz• 20 kHz • 25 kHz • 30 kHz • 50 kHz • 100 kHzD Using the band switchq Select VFO mode with [V/M].w Select the desired band with [BAND].e Push [BAND] for 2 sec. to enter tuning step setting condi-tion.r Rotate [DIAL] to select the desiredtuning step.t Push [BAND] to return to normaloperation.D Using set modeq Select VFO mode with [V/M].w Select the desired band with [BAND].e Push [V/M] for 2 sec. to enter set mode.r Rotate [DIAL] until “STEP” appears.• “STEP” disappears after 1 sec. and the previously selected tun-ing step and “tS” appear.t While pushing [FUNC], rotate [DIAL] to select the desiredtuning step.y Push [V/M] to exit set mode.73FREQUENCY AND CHANNEL SETTING15 kHz tuning stepFM755025755025FM 755025755025[DIAL] changes the frequency accordingto the selected tuning step.While pushing [FUNC], [DIAL] changesthe frequency in 1 MHz steps (default). |
Related manuals for Icom IC-Q7A
manualsdatabase
Your AI-powered manual search engine