Icom IC-Q7A Instruction Manual
Also see for IC-Q7A: Service manual
                                           | |
Contents
|
176SCAN OPERATION Selecting scan edgesThe scanning range can be set to all frequencies (full scan), aselected band or between two user-programmed frequencies(programmed scan).The programmed scan edges use regular memory chan-nels. Program the desired scan edge frequencies in mem-ory channels in advance. (pgs. 12, 13)q Select VFO mode with [V/M].w Push [V/M] for 2 sec. to enter set mode.e Rotate [DIAL] until “EDGE” appears.• “EDGE” disappears after 1 sec. and the previously selected scanedge appears.r While pushing [FUNC], rotate [DIAL] to select the desiredscan edge.• Select “ALL” for full scan, “BAND” forband scan or “0P”–“19P” for pro-grammed scan.t When full or band scan is se-lected, push [V/M] to exit setmode.When a programmed scan is se-lected, continue with the followingsteps to select the band edge fre-quencies.y Push [FUNC] + [Y] to select left-hand scan edge channel.u While pushing [FUNC], rotate[DIAL] to select the desired mem-ory channel which stores a scanedge frequency.• The frequency in the memory chan-nel is displayed for 1 sec.i Push [FUNC] + [Y] to select right-hand scan edge channel.o While pushing [FUNC], rotate[DIAL] to select the desired mem-ory channel which stores anotherscan edge frequency.!0 Push [V/M] to exit set mode.• Push [FUNC] + [Y] to indicate programmed scan edge for pro-gramming other scan edges. Repeat r, y – o.Full scanProgrammed scan 0(Scan edge channels198 and 199)1Memory channelfrequency is displayedduring selection. |
Related manuals for Icom IC-Q7A
manualsdatabase
Your AI-powered manual search engine