Icom IC-Q7A Instruction Manual
Also see for IC-Q7A: Service manual
                                           | |
Contents
|
Subaudible (repeater) tonesSome repeaters require subaudible tones to be accessed.Subaudible tones are superimposed over your normal signaland must be set in advance.Each operating band and each memory channel have inde-pendent settings.D Turning the subaudible tone encoder on/offq Push [V/M] for 2 sec. to enter set mode.w Rotate [DIAL] until “T/TSQL” appears.• “T/SQL” disappears after 1 sec. and “tO” appears.e While pushing [FUNC], rotate [DIAL] to select “TONE.”r Push [V/M] to exit set mode.• “T” appears above the frequency readout when the subaudibletone encoder is turned ON.D Setting the subaudible tone frequencyq Select VFO mode or desired memory channel to be pro-grammed.w Push [V/M] for 2 sec. to enter set mode.e Rotate [DIAL] until “R TONE” (repeater tone) appears.• “R TONE” disappears after 1 sec. and “Rt” appears.r While pushing [FUNC], rotate [DIAL] to select the desiredsubaudible tone.• Each operating band and each memory channel have indepen-dent settings.t Push [V/M] to exit set mode.• Available subaudible tone frequencies (unit: Hz)67.069.371.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1238REPEATER OPERATIONTRepeater tone set mode 88.5 Hz toneTone function set mode Tone encorder is ON. |
Related manuals for Icom IC-Q7A
manualsdatabase
Your AI-powered manual search engine