Icom IC-R1500 Instruction Manual

Also see for IC-R1500: Service manual Instruction manual

82SETTING A FREQUENCY12345678910111213141516 Receive mode selectionReceive modes are determined by the physical properties ofthe radio signals. The receiver has 6 receive modes: SSBLSB, CW, AM, WFM and FM modes. The mode selection isstored independently in each memory channels.Typically, AM mode is used for the AM broadcast stations(0.495–1.620 MHz) and air band (118–135.995 MHz), andWFM is used for FM broadcast stations (76–107.9 MHz).When Automatic mode is selected, IF filter passband width,tuning step, etc., are selected automatically after inputting afrequency. (p. ??)➥ Push [TS•MODE] for 1 sec. to enter the receive mode se-lect mode.r Rotate [DIAL] to select the desired mode.tPush [TS•MODE] to exit the receive mode select mode. Lock functionTo prevent accidental frequency changes and unnecessaryfunction access, use the lock function.➥ Push [SET•LOCK] for 1 sec. to turn the lock function ONand OFF.• [SET•LOCK] (lock function only), [MONI•T/T•SCAN] (monitorfunction only), [PWR], [VOL] and [SQL] can be used while thechannel lock function is in use.[SET•LOCK][DIAL][TS•MODE]