184MEMORY OPERATION12345678910111213141516 Memory bank selectionThe IC-R1500 has a total of 26 banks (A to Z). Regular mem-ory channels, 1 to 1000, are assigned into the desired bankfor easy memory management.qPush [MR•SKIP] several times to select memory mode, ifdesired.w Push [TS•MODE] to select memory bank condition.• Bank’s initial blinkse Rotate [DIAL] to select the desired bank, A to P.• Banks that have no programmed contents are skipped.r Push [TS•MODE] to set the bank.• Bank’s initial stops blinking.t Rotate [DIAL] to select the contents in the bank.• No channel numbers are displayed for memory bank operation.yTo return to regular memory condition, push [MR•SKIP]twice. Memory bank setting[q Select the desired memory channel.➥ Push [MR•SKIP] several times to select memory mode,then rotate [DIAL] to select the desired memory chan-nel.• “!” and memory channel number blink.w Push [SET•LOCK] to enter set mode.ePush [SET•LOCK] or [S.MW•MW] several times until“bAk” appears.rRotate [DIAL] to select the desired bank, A to Z.• Banks that have no programmed contents are skipped.t Push [TS•MODE] to exit set mode.