205SCAN OPERATION12345678910111213141516 Scan typesScanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 3 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN (p. ??) Repeatedly scans all frequen-cies over the entire band.Some frequency ranges arenot scanned according to thefrequency coverage of the re-ceiver’s version.150kHz3304.999MHzScanJumpALL/SELECTED BANKSCAN (p. ??)Repeatedly scans all bankchannels or selected bankchannels. The skip scan isalso available.SKIPSKIPA99 A03A00 A01 A02A04A98 A05FREQUENCY/MEMORYSKIP FUNCTION (p. ??)Skips unwanted frequenciesor channels that inconve-niently stop scanning. Thisfunction can be turned ONand OFF by pushing andholding [MR•SKIP] in eitherVFO or memory mode.BandedgeBandedgeScanSKIP SKIPJumpPROGRAMMED SCAN(p. ??)Repeatedly scans betweentwo user-programmed fre-quencies. Used for checkingfor frequencies within a speci-fied range such as repeateroutput frequencies, etc.Bandedge xxA xxBBandedgeScan edgesScanJumpMEMORY (SKIP) SCAN(p. ??)Repeatedly scans memorychannels except those set asskip channel. Skip channelscan be turned ON and OFFby pushing and holding[MR•SKIP] in memory mode.SKIPSKIPM 0 M 4M 1 M 2 M 3M 5M 199 M 6AUTO MEMORY WRITESCAN (p. ??)The frequencies that the pro-grammed scan stops are au-tomatically programmed into aselected memory bank.Scan edge Scan edgech 1 ch 2PauseProgram ProgramPauseScan

PANEL DESCRIPTION

I Function display

q Antenna

SETTING A FREQUENCY

I Tuning step selection

BASIC OPERATION

I Squelch attenuator

MEMORY OPERATION

I Programming a memory channel

I Programming channel names

I Copying memory contents

I Memory clearing

I Memory bank selection

SCAN OPERATION

I Scan start/stop

I Scan edges programming

I Skip channel/frequency setting

PRIORITY WATCH

POCKET BEEP AND TONE SQUELCH

I Tone/DTCS squelch operation

SET MODE

I Speciﬁcations

I Options

Icom IC-R1500 Instruction Manual

LOGIC UNIT

MAIN-A UNIT

PLL CIRCUITS

DIGITAL MODE OPERATION WITH UT-122

POWER SUPPLY CIRCUITS

CPU PORT ALLOCATION

PREPARATION

MAIN-A UNIT ADJUSTMENT

MAIN-B UNIT ADJUSTMENT (PCR2500 only)

main unit

top view

IC-R1500

Rear panel connection

panel description

Function display—controller

Rear panel—main unit

Mode selection

Tuning step selection

Receive mode selection

Monitor function

Attenuator function

AFC function

IF ﬁlter selection

Duplex operation

Memory channel selection

Programming a memory channel

Programming channel names

Copying memory contents

memory operation

Memory clearing

Memory bank setting

Memory bank selection

scan operation

Scan start/stop

Scan edges programming

Skip scan

Scan resume condition

pocket beep operation

Tone/DTCS squelch operation

Tone scan

Set mode items

set mode

Weather channel operation

DATA cloning

Partial reset

Internal audio switch

troubleshooting