Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 25 page image

205MEMORY OPERATION5■ Programming a memory channel[EXAMPLE]: Programming 145.800 MHz into memory channel 20 (blank channel).Push Rotate for setting frequency, etc. Push for 1 sec.Rotate Push for 1 sec. and continue to push ➠Beep“BeepBeepBeep“““““BeepBeep““S.MWVFO/MRS.MWVFO/MRS.MWVFO/MRRelease S.MWVFO/MRVFO settings, including the set mode contents such as sub-audible tone frequency, offset, scan skip information can beprogrammed into a memory channel.qSet the desired frequency in the desired band (left or right).➥ Push the desired band’s [VFO/MR•S.MW] once or twiceto select VFO mode.➥ Set the frequency using the same band’s [DIAL].➥ Set other data (e.g. tone frequency, duplex information,etc.) if required.wPush and hold the same band’s [VFO/MR•S.MW] for1 sec. to enter select memory write mode.• “!” indicator and the memory channel number blink.eRotate [DIAL] to select the memory channel to be pro-grammed.• Memory channels not yet programmed are blank.r Push and hold [VFO/MR•S.MW] for 1 sec. to program.• 3 beeps sound• Memory channel number automatically increases when contin-uing to push [VFO/MR•S.MW] after programming.✔CONVENIENTMemory programming can be performed in versatile wayse.g. memory channel to the same (or different) memory chan-nel, etc.