Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 3 page image

RWARNING! NEVER connect the receiver via the OPC-254L to an AC outlet. This may pose a fire hazard or result in an elec-tric shock.RWARNING! NEVER operate the receiver while driving avehicle. Safe driving requires your full attention— anything less mayresult in an accident.NEVER connect the receiver to a power source of more than 14 VDC. This will damage the receiver.NEVER connect the receiver to a power source using reverse po-larity. This will damage the receiver.NEVER cut the DC power cable between the DC plug and fuseholder. If an incorrect connection is made after cutting, the receivermay be damaged.NEVER expose the receiver to rain, snow or any liquids. The re-ceiver may be damaged.NEVER operate or touch the receiver with wet hands. This mayresult in an electric shock or damage the receiver.NEVER place the receiver where normal operation of the vehiclemay be hindered or where it could cause bodily injury.NEVER let objects impede the operation of the cooling fan on therear panel.AVOID using or placing the receiver in direct sunlight or in areaswith temperatures below –10°C (+14°F) or above +60°C (+140°F).BE CAREFUL! The receiver will become hot when operating itcontinuously for long periods.AVOID setting the receiver in a place without adequate ventilation.Heat dissipation may be affected, and the receiver may be damaged.AVOID the use of chemical agents such as benzine or alcoholwhen cleaning, as they can damage the receiver’s surfaces.For U.S.A. onlyCAUTION: Changes or modifications to this device, not ex-pressly approved by Icom Inc., could void your authority tooperate this device under FCC regulations.iiPRECAUTION