Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 32 page image

275 MEMORY OPERATION■ Memory bank selectionq Push [VFO/MR•S.MW] to select memory mode in the de-sired band (left or right).w Push [MHz•TS] to enter memory type selection mode.e Rotate [DIAL] to select the desired bank (A to H, J to R, T,U, W or Y).• Only programmed banks are displayed.r Push any switch for main band or common switch to setthe bank indication.• Bank’s indicator appears at top of the memory channel.t Rotate [DIAL] to select the contents in the bank.y To return to regular memory mode, repeat steps w–r andselect “bAnk --” at step e.• Memory bank indication■ Transferring bank contentsThe bank contents of programmed memory channels can becleared or transferred to another bank.INFORMATION: Even if the memory bank contents arecleared, the memory channel contents still remain pro-grammed.q Select the desired bank contents to be transferred orerased from the bank in the main band.➥ Push the main band’s [VFO/MR•S.MW] several timesto select memory mode.➥ Push the same band’s [MHz•TS] then rotate the sameband’s [DIAL] to select the desired memory bank.• Bank’s indicator appears at top of the memory channel.➥ Push any switch for main band or common switch to se-lect the bank then rotate [DIAL] to select the desiredcontents.[DIAL][MHz•TS][VFO/MR•S.MW]Bank indicator appears[DIAL][MHz•TS][VFO/MR•S.MW]