Icom IC-R75 Instruction Manual
Also see for IC-R75: Price listInstruction manualInstruction manualService manual
                                              | |
Contents
| 
124 FREQUENCY SETTING Frequency settingRotate the tuning dial to change the frequency.• The frequency changes in increments determined by theselected tuning step (see below).• When the lock function is activated (“LOCK” appears), thefrequency cannot be changed via tuning dial.Push [TS] one or more times to select a quick tuningstep.D Programmable tuning stepsProgrammable tuning steps are available to suit youroperating requirements.These tuning steps are:• Independently selectable for each mode• Selectable from 0.1, 1, 5, 6.25, 9, 10, 12.5, 20, 25,100 kHzq Select the desired operating mode with [SSB],[CW/RTTY], [AM] or [FM]. (p. 14)w Push [TS] one or more times until the programma-ble tuning step indicator, “",” appears above the 1kHz.• Rotating the tuning dial changes the frequency accord-ing to the set tuning step.e Push [TS] for 2 sec. while the programmable tun-ing step indicator appears to enter the tuning stepset mode.r Rotate the tuning dial to set the desired tuning stepfor the selected mode.t Push [TS] to exit the tuning step set mode.y Rotate the tuning dial to change the frequency ac-cording to the set tuning step.D 1 Hz and 10 Hz tuning stepsWhen both the 1 MHz tuning step and programmabletuning step, “",” disappear, rotating the tuning dialchanges the frequency in increments of 1 or 10 Hz.q Push [TS] one or more times until the programma-ble tuning step indicator or 1 MHz tuning step in-dicator, “",” disappears.w Push [TS] for 2 sec. to toggle between the 1 and10 Hz step settings.• When the 1 Hz step is selected, the 1 Hz digit appearsin the frequency indication; when the 10 Hz step is se-lected, the 1 Hz digit disappears from the frequency in-dication.USB R XBLANKBLANKS1 3 5 7 9 20 40 60 dBAGCANTVFO1Programmable tuningstep indicator10 kHz tuning step isselected.[TS]USB R XBLANKBLANKS1 3 5 7 9 20 40 60 dBAGCANTVFO1USB R XBLANKBLANKS1 3 5 7 9 20 40 60 dBAGCANTVFO1Rotating the tuning dialchanges the frequencyin 10 Hz steps.Rotating the tuning dialchanges the frequencyin 1 Hz steps.TSPush for 2 sec. |
Related manuals for Icom IC-R75
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine