Icom IC-R75 Instruction Manual
Also see for IC-R75: Price listInstruction manualInstruction manualService manual
                                              | |
Contents
| 
Scan types725SCANS Preparation• ChannelsFor programmed scan/auto memory write scan:Program scan edge frequencies into scan edge mem-ory channels P1 and P2.For memory scan:Program 2 or more memory channels except scanedge memory channels.For select memory scan:Designate 2 or more memory channels as select mem-ory channels. To designate the channel as a selectmemory channel, select a memory channel, then push[SEL] in the scan screen (memory mode) or in thememory channel screen.For priority watch:Program 1 or more memory channels.• Scan resume ON/OFFYou can select the scan to resume or cancel when de-tecting a signal, in set mode. Scan resume ON/OFFmust be set before operating a scan. See p. 31 forON/OFF setting and scan resume condition details.• Scan speedScan speed can be selected from 2 levels, high or low,in set mode. See p. 31 for details.• Squelch conditionPROGRAMMED SCAN/AUTO MEMORY WRITE SCANRepeatedly scans between two scan edge frequencies(scan edge memory channels P1 and P2). Auto memorywrite scan automatically memorizes paused frequenciesinto memory channels 80 to 99.This scan operates in VFO mode.PRIORITY WATCHRepeatedly watches a memory channel.This scan operates in memory mode. This scan operates in VFO mode.ScanScan edgeP1 or P2Scan edgeP2 or P1JumpThis scan operates in memory mode.MEMORY SCANRepeatedly scans all programmed memory channels.Mch 1 Mch 5Mch 2 Mch 3 Mch 4Mch 6Mch 7Mch 99BLANKS (select)S (select) S (select)S (select)S (select)SELECT MEMORY SCANRepeatedly scans all select memory channels.Mch 1 Mch 5Mch 2 Mch 3 Mch 4Mch 6Mch 7Mch 99BLANKS (select)S (select) S (select)S (select)S (select) VFOfrequencyMemorychannel5 sec.125 msec.ScanstartwithProgrammed scan/auto memory writescanMemory scanSquelchopenThe scan continuesuntil it is stopped man-ually, and does notpause even if it detectssignals.Scan pauses oneach channel whenthe scan resume isON; not applicablewhen OFF.SquelchopenclosedScan stops when detecting a signal.If you set scan resume ON in set mode, thescan pauses for 10 sec. when detecting a sig-nal, then resumes. When a signal disappearswhile scan is paused, scan resumes 2 sec.later. |
Related manuals for Icom IC-R75
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine