Icom IC-R75 Instruction Manual
Also see for IC-R75: Price listInstruction manualInstruction manualService manual
                                              | |
Contents
| 
930SET MODE Set mode descriptionSet mode is used for programming infrequentlychanged values or conditions of functions.D Set mode operationq Push [ (ANT) SET] to enter the set mode.w Push [UP Y] or [Z DN] to select the desired item.e Set the desired condition using the tuning dial.r Push [ (ANT) SET] to exit the set mode.• RF/squelch controlThe [RF/SQL] control can be set as the squelch con-trol (default; RF gain is fixed at maximum), the RFgain control only (squelch is fixed as open) orRF/squelch control.See p. 14 for details.• Confirmation beepA beep sounds each time a switch is pushed to con-firm it. This function can be turned OFF for silent op-eration.The volume level can be set in the next item.• Beep levelThis item adjusts the volume level for confirmationbeep tones from 0% to 100% in 1% steps.• The volume level is displayed in 10% steps. ‘5’ indicates50% volume level.• S-meter peak holdThe peak level of the S-meter can be displayed for 0.5sec. to confirm it easily.• Beep level limitThis item limits the maximum volume level for confir-mation beep tones. |
Related manuals for Icom IC-R75
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine