62 PANEL DESCRIPTION Rear panelq RECORDER REMOTE JACK [REC REMOTE]Controls the running of a tape recorder for record-ing. Connects to the REMOTE jack on a taperecorder.• This function can be turned OFF in set mode. (p. 32)w RECORDER JACK [REC]Outputs receive audio signals. Connects to the AUXor LINE IN jack on a tape recorder.e RS-232C CONNECTOR [RS-232C]Connects an RS-232C cable. An RS-232C cablecan be used to connect the receiver to a PC. In thisway commands can be sent to the receiver via thePC.r CI-V REMOTE CONTROL JACK [REMOTE]Allows connection to an Icom CI-V system trans-ceiver or another receiver for the transceive func-tion. Also connects to a PC with several receiversfor command control via an optional CT-17 CI-VLEVEL CONVERTER.t EXTERNAL SPEAKER JACK [EXT SP]Connects an 8 Ω external speaker, if desired.• When an external speaker is connected, the internalspeaker does not function.y MUTE CONTROL JACK [MUTE]Mutes audio outputs and attenuates the receive sig-nal input when grounded. Used for CI-V transceiveoperation with a transceiver.u GROUND TERMINAL [GND] (p. 7)Connects the black terminal to ground.i ANTENNA 2 TERMINAL [ANT 2] (p. 9)Connects the red terminal to a 500 Ω long wire an-tenna.o ANTENNA 1 CONNECTOR [ANT 1] (p. 9)Connects a 50 Ω antenna with a PL-259 connectorand a 50 Ω coaxial cable.!0 DC POWER JACK [DC 13.8V] (p. 8)➥ Connects the supplied AC adapter for versionswith an AC adapter.➥ Connects to a 13.8 V DC power source using thesupplied DC cable for versions without an ACadapter.• Current of 1.5 A or greater is required.DO NOT use a cigarette lighter socket as apower source when operating in a vehicle. Theplug may cause voltage drops and ignition noisemay be superimposed onto received audio.q w r t y u ie o !0