Icom IC-T70A Instruction Manual

Also see for IC-T70A: Product review Service manual Service manual Instruction manual

Contents

6610OTHER FUNCTIONS12345678910111213141516171819The transceiver has 3 methods of transmitting a DTMF codesequence. Select a desired option in the Set mode.qPush [SET] to enter the Set mode.wRotate [DIAL] to select the DTMF TX key item.[VOL][DIAL]eRotate [VOL] to select a desired DTMF key setting.• kEy : Transmits the appropriate DTMF code assigned to thepushed key. (default)• mEm : Transmits the programmed DTMF code sequence in theDTMF memory channel assigned to the pushed key.• t-CALL : No DTMF code can be transmitted. However, whilecontinuing to push [PTT], pushing [MONI](BAND)transmits a 1750 Hz tone burst signal.r Push [V/M/C] to return to the frequency display.D Manual DTMF code transmissionFirst, set the DTMF TX key to “kEy” in the Set mode.➥ While continuing to push [PTT], push the desired keys totransmit a DTMF code sequence manually.• [0]–[9], [A](SET), [B](BAND), [C](H/M/L), [D](V/M/C), [M](.) or[#] sends “0”–“9,” “A,” “B,” “C,” “D,” “M” or “#.”[PTT]DTMF code keys■ Transmitting a DTMF code sequence