Icom IC-V85 Instruction Manual

Also see for IC-V85: Step-by-Step Programming Guide Service manual Service manual Instruction manual

62PANEL DESCRIPTION12345678910111213141516171819[6• SKIP ]➥ Input digit “6” during frequency input, memorychannel selection, etc. (pgs. 17, 26)➥ After pushing [FUNC], sets and cancels skipsetting for memory scan during memory mode.(p. 37)[7• PRIO]➥ Input digit “7” during frequency input, memorychannel selection, etc. (pgs. 17, 26)➥ After pushing [FUNC], starts priority watch.(p. 38)[8• SET]➥ Input digit “8” during frequency input, memorychannel selection, etc. (pgs. 17, 26)➥ After pushing [FUNC], enters into SET MODE .(p. 47)[9• H/M/L]➥ Input digit “9” during frequency input, memorychannel selection, etc. (pgs. 17, 26)➥ After pushing [FUNC], switches transmit powerbetween high, middle and low output power.(p. 19)When the transceiver becomes hot duringhigh or middle output power operation, thebuilt-in protection circuit activates to reducethe transmit output power to 3 W (approx.) .[0• OPT]➥ Input digit “0” during frequency input, memorychannel selection, etc. (pgs. 17, 26)➥ After pushing [FUNC], selects an optional func-tion mode, such as pager or code squelch op-eration. (pgs. 45, 46)[#• BANK ]After pushing [FUNC], enters a memory bank se-lection. (p. 30)[✱ ENT• ]➥ Sets the frequency even if the full 6 digits offrequency have not been entered. (p. 17)➥ After pushing [FUNC], switches key lock func-tion ON and OFF when pushed and held for 1sec. Lock all keys, except [PWR], [PTT],[MONI] and audio level adjustment. (p. 20)ENTBANK0OPT9H/M/L8SET7PRIO6 SKIP