Icom IC-V85 Instruction Manual

Also see for IC-V85: Step-by-Step Programming Guide Service manual Service manual Instruction manual

43PAGER/CODE SQUELCH10■ Pager functionThis function uses DTMF codes for paging and can be usedas a “message pager” to confirm you of a caller’s identificationeven when you leave the transceiver temporarily unattended.■ Code programmingDD Before programmingThe pager and code squelch functions require ID codes and agroup code. These codes are 3-digit DTMF codes and mustbe written into the code channels before operation.q Decide the ID code of each transceiver and a group codefor your group.w Decide whether you want to return to normal operation orcode squelch operation after a connection is made.e Program the ID code, group code and transmit codes(other station’s codes) as below.DD Code channel assignment*Channel CP automatically memorizes an ID code when receiving apager call. The contents in channel CP cannot be changed manually.Pager selective code (push [PTT])Beep BeepBeepAnswer back (manual)Beep BeepBeepSet both transceivers to eithercode squelch or non-coded operationCommunicationID OR CODE CHANNEL “RECEIVE ACCEPT” ORGROUP CODE NUMBER “RECEIVE INHIBIT”Your ID codeOther parties’ID codeGroup codeMemory space*01–6One of 1–6P“Receive accept” only“Receive inhibit” should beprogrammed in each channel.“Receive accept” must beprogrammed in one channel.“Receive inhibit” only.Requires Optional UT-108Optional UT-108 is required when using the pager/code squelch functions.