35SCAN OPERATION8■ Programmed scanProgrammed scan repeatedly scans between two user pro-grammed frequencies (memory channels “1A–3A” and“1b–3b”) or scans between upper and lower band edges. Thisscan is useful for checking for signals within a specific fre-quency range such as repeater output frequencies, etc.Scans between lower (start) and high (stop) frequency.q Push [CLR] to select VFO mode, if necessary.wPush [FUNC] and [SCAN ](5) to start a scan.ePush [FUNC] and [SET](8) several times to select the de-sired scan edge, “P1,” “P2,” “P3” or “AL.”• “AL” for full scan, “P1”, “P2” and “P3” for programmed scan be-tween the programmed scan edge channels as “1A”–“1b,”“2A”–“2b” and “3A”–“3b.”• To change the scan direction, push [YY] or [ZZ].• When [VOL] is assigned as tuning dial, rotate [VOL] to changethe scan direction. (pgs. 18, 53)r Push [CLR] to stop the scan.PushSET8FUNCAPush FUNCA SCAN5PROGRAMMED SCANMEMORY (SKIP) SCANPRIORITY WATCHBandedge BandedgeStart1A2A3AEnd1b2b3bScan edgesScanJumpSKIP SKIPSKIPMch 1Mch 0Mch 2 Mch 3Mch 3Mch 4 Mch 5Mch 10Mch 99 Mch 9 Mch 8 Mch 7Mch 6Mch 1Mch 2Mch 3Mch 4Mch 5Mch 99 Mch 6VFO frequency145.20 MHzVFO frequency145.20 MHz5 sec. 50 msec.5 sec. 50 msec.Priority channelPriority channelsMemoryscanPriority memory channel watchPriority memory channel scanProgrammed scan P1 scans between 1A and 1b, P2 scans be-tween 2A and 2b, and P3 scans between 3A and 3b frequencies.■ Scan types