Icom ID-800H Instruction Manual

Also see for ID-800H: Addendum Operating guide Service manual Firmware update Instruction manual

Contents

Icom ID-800H Instruction Manual Manual pdf 12 page image

VD Battery connectionRWARNING! NEVER remove the fuse holders from the DCpower cable.NEVER connect the transceiver directly to a 24 V battery.DO NOT use the cigarette lighter socket for power connec-tions. (See p. 6 for details)Attach a rubber grommet when passing the DC power cablethrough a metal plate to prevent a short circuit.• CONNECTING TO A DC POWER SOURCED DC power supply connectionUse a 13.8 V DC power supply with at least 15 A capacity.Make sure the ground terminal of the DC power supply isgrounded.• CONNECTING TO A DC POWER SUPPLYSee p. 108 for fuse replacement.DC powersupply 13.8 Vto anACoutletFuses20 Ablackred⊕−⊕−ID-800HID-800HFuses20 Ablackred⊕ −12 VGrommetNOTE:Use terminals for thecable connections.WARNING!NEVERremove thefuse holders.Crimp Solder12 Vbattery SuppliedDC power cable+ red_ blackQUICK REFERENCE GUIDE