548OTHER FUNCTIONS8 OTHER FUNCTIONS■ Using the DTMF MemoryThe transceiver can store up to 16 Memory channels of24-digit DTMF codes.• “E” stands for “M” and “F” stands for “#” on the display.D Entering a DTMF codeHold down [LOW DTMF]q C for 1 second.• Enters the DTMF Menu mode.w Rotate [DIAL]S to select “MEMORY” (DTMF Memory).Push [e ï]D.• Displays the DTMF Memory Selection screen.r Rotate [DIAL]S to select a desired DTMF memory.DTMF memoryPush [t ï]D.• Enters the DTMF Memory Entry mode.BlinksRotate [DIAL]y S to select a desired number to enter acode.BlinksPush [u Ω]D to move the cursor backwards, or push [≈]Dto move the cursor forwards.• Push [CLR]D to delete the selected code and all codes that arelocated to the right of the cursor.• When the cursor is located to the right edge, the code to the leftof the cursor is deleted.• Hold down [CLR]D for 1 second to delete all the code.Repeat stepsi y and u to enter a desired DTMF code.After entering, push [o ï]D.• Beeps sound.• Saves the channel, and returns to the DTMF memory selectionscreen.!0 Push [MAIN BAND]S.• Exits the DTMF Menu mode.Side SideDisplayCenterThe C, S, or D in theinstructions indicate thearea of the controller.C: CenterS: SideD: Display
