618 OTHER FUNCTIONS■ Cloning functionCloning allows you to quickly and easily transfer the enteredcontents from a PC to a transceiver using the optional CS-2730 cloning software, or enter contents from one trans-ceiver to another one.D Cloning from a PC using a cloning cableYou can clone with the CS-2730 cloning software and theoptional cloning cable.See the CS-2730 instruction manual for details. (downloadedfrom the Icom WEB site; http://www.icom.co.jp/world/)D Cloning between transceiversConnecting the master and sub transceivers1.Select a master transceiver to send data to a sub transceiver.Connect them as shown below.Turn OFF the master and sub transceivers.qConnect the OPC-474w cloning cable to the [SP2] jack ofthe master and sub transceivers.OPC-474To [SP2]To [SP2]Master transceiver (Rear)Sub transceiver (Rear)Turn ON the master and sub transceivers.eSetting the sub transceiver2.Push [MENUr ]C of the sub transceiver.• Enters the MENU mode.t Rotate [DIAL]S to select “CLONE” (Clone).(MENU-EXMENU > EXMEN-OTHERS > OTHER-CLONE)Push [y ï]D.• Goes to the next tree level.Rotate [DIAL]u S to select “CLONE” (Clone Mode).Push [i ï]D.• Displays “CLONE?.”o Rotate [DIAL]S to select “YES.”!0 Push [ï]D.• Enters the Clone mode.
