1PANEL DESCRIPTION1ertyuiuyqwertw■ Controller — Front panelq POWER KEY [ ]( )Hold down for 1 second to turn power ON or OFF.➥Push to mute the audio. (p. 27)➥w MAIN•BAND KEY [MAIN BAND]Push to select the MAIN band. (p. 23)In the VFO modeHold down for 1 second to enter the Operating band selectmode. (p. 24)In the Memory modeHold down for 1 second to enter the Memory bank selectmode. (p. 33)e VFO/MHz TUNING•SCAN KEY [V/MHz SCAN]Push to select the VFO mode.➥In the VFO mode, push to select 1 MHz tuning. (p. 24)➥Hold down for 1 second to display the scan type setting➥screen. (pp. 41, 43)r MEMORY•CALL KEY [MR CALL]In the VFO mode, push to select the Memory mode.➥(p. 23)In the Memory mode, push to select the Weather chan-➥nel mode.* (p. 23)*Weather channels are selectable in only the USA version.Hold down for 1 second to select the Call channel➥mode. (p. 23)t VOLUME CONTROL (p. 23)y TUNING DIAL [DIAL]In the VFO modeRotate to select the operating frequency. (pp. 24, 25)In the Memory modeRotate to select a Memory channel. (p. 29)While scanningRotate to change the scanning direction. (p. 37)In the MENU modeRotate to select a desired option or value. (p. 11)u SQUELCH CONTROL (p. 25)Rotate to adjust the squelch level.Display (p. 2)Microphoneconnector (pp. 5, 63)For your reference:The key-touch beep tones on the left band are different thanthe tones on the right band. The different tones will let youknow which band you are operating on.o !0 !1
