Icom iC-M505 Instruction Manual

Also see for IC-M505: Instruction manual Instruction manual Instruction manual

Contents

Icom iC-M505 Instruction Manual Manual pdf 38 page image

326 DSC OPERATIONt After the all ships call has been transmitted, the followingindication is displayed.y Push [CLR] to exit and the transceiver selects Channel 16automatically.• Even if [CLR] hasn’t been pushed, the transceiver automaticallyselects Channel 16 after 2 sec. of inactivity.DD Transmitting a position request callTransmit a position request call when you want to know aspecific ship’s current position, etc.q Push [MENU] to enter the DSC menu.w Rotate [CHANNEL] to select “PPoossiittiioonn RReeqquueesstt,”push [CHANNEL•ENTER].• “PPoossiittiioonn IInnppuutt” item appears when a GPS receiver(NMEA0183 ver. 2.0 or 3.01) is not connected.e Rotate [CHANNEL] to select the desired pre-programmedindividual address or “MMaannuuaall IInnppuutt,” push [CHAN-NEL•ENTER].• The ID code can be set in advance. (p. 17)• When “MMaannuuaall IInnppuutt” is selected, set the 9-digit MMSInumber for the individual you wish to call by rotating [CHAN-NEL].--DSC Menu--Select ItemPosition InputIndividual CallGroup CallAll Ships Call˘Position RequestPosition Report--DSC Menu--All Ships CallTX Complete