58CONNECTIONS AND MAINTENANCE9 Connectionsq NMEA IN LEAD (Red)Connects to a GPS receiver for position indication.• A NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC, GGA,GNS, GLL and VTG) compatible GPS receiver is required. Askyour dealer about suitable GPS receivers.w NMEA OUT LEAD (White)Connects to a PC or navigation equipment (NMEA0183ver. 3.01 sentence formatters DSC, DSE compatible) forposition data received from other ships.e EXTERNAL SPEAKER LEAD (Yellow)Connects to an external speaker.r HAILER/FOGHORN (–) LEAD (Black)Connects to a hailer speaker (25 W nominal at 13.8 V/4 Ω).t HAILER/FOGHORN (+) LEAD (Blue)Connects to a hailer speaker (25 W nominal at 13.8 V/4 Ω).y ANTENNA CONNECTORConnects a marine VHF antenna with a PL-259 connectorto the transceiver.CAUTION: Transmitting without an antenna may dam-age the transceiver.u GROUND TERMINALConnect this terminal to a vessel ground to prevent electri-cal shocks and interference from other equipment occur-ring. Use a self-tapping screw (3 × 8 mm.)i EXTERNAL MICROPHONE JACKConnects to optional command microphone.o DC POWER CONNECTORConnects the supplied DC power cable from this connectorto an external 12 V battery.Do notloose!ortyiwqeu

explicit definitions

in case of emergency

operating rules

panel description

i function display

basic operation

i receiving and transmitting

i call channel programming

i channel comments

i optional voice scrambler operation

scan operation

i setting tag channels

I Operation

dsc operation

i mmsi code check

i dsc address id

d deleting individual id

d programming group id

d deleting group id

i position and time programming

i position and time indication

i distress call

i transmitting dsc calls

d transmitting a group call

d transmitting an all ships call

d transmitting a position request call

i receiving dsc calls

d receiving an individual call

d receiving a position request call

d receiving a polling request call

i received messages

d other messages

dsc set mode

other functions

i rx speaker function

i hailer operation

set mode

connections and maintenance

i supplied accessories

i mounting the transceiver

I MB-75 installation

troubleshooting

specifications and options

I Options

channel list

Icom iC-M505 Instruction Manual

explicit defenitions

OPERATING RULES

PANEL DESCRIPTION

Function display

Microphone

BASIC OPERATION

Receiving and transmitting

Call channel programming

Channel comments

Optional voice scrambler operation

SCAN OPERATION

Setting TAG channels

DUALWATCH/TRI-WATCH

DSC OPERATION

MMSI code check

DSC address ID

Position and time programming

Position and time indication

Distress call

d regular call

transmitting dsc calls

Receiving DSC calls

Received messages

DSC Set mode

Intercom operation

RX Speaker function

Hailer operation

Set mode programming

lcd contrast

Connections

Antenna

Mounting the transceiver

MB-75 installation

UT-112/UT-98 installation

Specifications

Options

CHANNEL LIST

TEMPLATE

IC-M505

A. Introduction

D. Dynamic information

G. Display

B. Activation of the AIS

D. Explanation of basic operation

E. Advanced operation (*)

function display

receiving and transmitting

Call channel programmng

Functon dsplay

Operaton

position and time programming

Poston and tme ndcaton

Dstress call

receiving dsc calls

received messages

Intercom operaton

Recevng DSC calls

Haler operaton

Connectons

mounting the transceiver

Mountng the transcever

Optons