66o Day Hrs: Lists the total hours the employee worked for the day.o Punch Hrs: Lists the total hours the employee worked for that punch pair.Clocking In/Out from GPS Enabled – Location TrackingIf an employee clocks In/Out using a web browser, additional punch information is available.Note: A punch that includes GPS location information is flagged with a ‘G’ on the reports. By clicking onthat punch you can view additional information provided by the phone’s GPS.GPS Location• Latitude/Longitude: The location of the employee when they created the punch.• Accuracy: The accuracy of the coordinates given by the GPS.Example: The accuracy of this punch is up to 372 feet. In other words, the employeewas within a 372ft radius of the coordinates given.• Speed: States how fast the em ployee was traveling when they created the punch.By using Google Maps integration and clicking on the GPS link, you can view the location ofthe employee at the time of the punch.IP Address RestrictionUsing IP Address Restriction, you can restrict employees from punching from unauthorizedlocations. This information can be flagged and tracked on your reports.IP address restrictions are enforced by setting authorized IP addresses globally (company-wide) and/or by employee.Setting Authorized IP Addresses GloballyGlobal Authorized IP Address(es) assigns the IP address that all employees can use. . To setthis, follow the instructions below.1. Select Settings | Preferences and click the Device tab.2. In the Global Authorized IP Address(es) field, enter the IP address(es) of the computer(or other web-enabled device) the employees are authorized to punch in/out on.3. The authorized IP address can be listed in the following ways.• Any IP Address: Leave the field blank to allow employees to punch in/out from any IPaddress.
