Idis DR-2100P Series Operation Manual

Also see for DR-2100P Series: Operation manual Quick guide

Idis DR-2100P Series Operation Manual Manual pdf 24 page image

Part 1 - Getting Started24Advanced SettingsIn PTZ mode, selecting a camera and then clickingMenu button loads the Advanced PTZ screen as shownbelow. You can load the Advanced PTZ screen alsoby pressing the Play/Pause button and then SETUPbutton on the front panel. This menu lists Speed, AutoPan, and other advanced PTZ camera control optionsavailable for the camera. Options that are not availablefor the selected PTZ camera remain inactive.You can use the mouse to control PTZ cameras. Left-click on the mouse and drag to move the camera inthe desired direction and use the mouse wheel tozoom in/out.While in PTZ mode, place the mouse pointer close tothe bottom edge of the screen to display the PTZ Toolswindow.PTZ Camera Pan and TiltZoom In/OutFocus Near / FarIRIS Open / CloseOne PushSet / Move to PresetDevice Menu supportedby the camera• The exact PTZ protocol supported by the cameramust be specified in order to use the NVR's PTZcontrols.• Drag and drop to reposition the PTZ Tools window.• Select the icon to hide the PTZ Tools window.Event MonitoringWhen an event occurs, the NVR automatically displaysthe channel linked to the event and shows theicon on the system status area on the upper rightportion of the screen. To use the Event Monitoringfeature, navigate to Display Setup > OSD and enableEvent Monitoring. Event Monitoring remains in effectthroughout the entire Linked Recording Time. Afterthat, the NVR will return to the previous screen if a newevent does not take place. Pressing the Layout or aCamera button before the end of the Linked RecordingTime reverts the system to Live mode.