Idis DR-2100P Series Operation Manual

Also see for DR-2100P Series: Operation manual Quick guide

Idis DR-2100P Series Operation Manual Manual pdf 58 page image

Part 2 - Configuration58Audio Detection● No.: Select which cameras to apply Audio Detectionto.● Sensitivity: Set to between 1 (Low) and 5 (High).● Activation Time: Specify how long audio detectionhas to last in order for it to be considered an event.Audio detections that do not last for the specifiedduration of time will not be considered as events.● Actions: Specify which actions to take when audiodetection events occur.– Record: Specify which cameras to begin linkedrecording on when an event occurs. If the scheduleis set to Event or Time & Event mode, the selectedcameras will begin linked recording when an eventoccurs.– Alarm-Out: Designate event-triggered alarm-outchannels (each for the NVR and camera) and beeps.– Notify: Configure to be notified of events by Mail,LAN1 through 5, SNS, Push, and/or Alert Window.– PTZ: Moves the PTZ camera to a specific presetposition when an event occurs.In order to use the Callback feature, the NVR must beregistered on the remote program.● Ignoring Interval: The system does not produceevent log entries or issues remote notificationsregarding audio detected during the specified timefollowing the initial audio detection. Set a valuebetween 1 sec and 5 secs or choose Never.● Use Ignoring Time: Select Time Setup to specify theaudio detection ignore time. Audio detection will bedisabled during the specified time frame.Text-In● Setup: Configure text-in devices.• It's possible to batch configure all text-in deviceswith the exception for port settings.• An influx of large amounts of text-in data frommultiple channels can hinder system performance.