Idis DR-2100P Series Operation Manual

Also see for DR-2100P Series: Operation manual Quick guide

Idis DR-2100P Series Operation Manual Manual pdf 49 page image

Part 2 - Configuration49● Auto Deletion: Configure this option to deleterecording data automatically after the specifiednumber of days has elapsed. Select between 1 dayand 999 days.To disable Auto Deletion, select Never. If enabled,recording data will be stored on the NVR forthe specified number of days and then deletedautomatically. Expired recording data are deletedautomatically at midnight and will be deleted even ifthe system reboots or the Auto Deletion setting hasbeen changed.● Limit Time-Lapse Recording: You can store eventrecording data for longer. If you do not wish to useLimit Time-Lapse Recording, select Never. Thisfunction is activated when data has been stored forlonger than as configured because the recordingdisk has sufficient capacity and saves new data byoverwriting Time Lapse Recording data that areolder than as specified under Recycle mode.• If the recording stored on the disk is shorter thanthe duration specified under Limit Time-LapseRecording, the older of Event Recording or TimeRecording data is deleted first.• The system's recording time may change dependingon recording quality, resolution, motion, and otherconfigurations made by the user. The durationspecified under Limit Time-Lapse Recording maynot be guaranteed in certain situations.● Recording Failover Service: If the network goesdown, this feature will transfer temporary data storedin the camera’s buffer to the NVR when the networkgoes online again.● Use Panic Recording: Enable/disable PanicRecording.● Panic Recording Duration: Disable Panic Recordingautomatically. Select between 5 mins and 1 hr. If youdo not wish to disable the feature automatically,select No Limit.● Video Profile: Select a recording profile value forPanic Recording.Schedule