Configuration2014-04-15 129Pos: 83 /806-IHSE/Konfiguration/480_Konsolen-Einstellungen/480-xx/Extender OSD @ 8\mod_1351502028499_6.doc @ 69501 @ 3 @ 15.9.3 Extender OSDIn this menu the settings for the Extender OSD can be adjusted. Theseare local settings that can be made individually for each console.You can select the following Extender OSD settings:Field Selection Descriptionactivated When executing the key sequence foropening the OSD, a selection list forswitching CPU devices will be displayedin the center of the monitor. Pressing within the selection list opens thestandard OSD.Enable CPUSelectiondeactivated Function not active (default)activated Enable Extender OSD (default: YES)EnableConnectionInfo deactivated Function not activeactivated Update connection changes during fade-in of Extender OSD (default: YES)UpdateConnectionInfo deactivated Function not activeDisplay Time 0-999secondsDuration of OSD fade-in (default: 10)HorizontalPosition10 pixels Horizontal OSD position (default: -2)VerticalPosition10 pixels Vertical OSD position (default: 2)When setting the horizontal OSD position, a prefixed minus describes theorientation to the right edge of the monitor, e.g. -2 means 2 x 10 = 20pixels to this edge. When setting a vertical position, a prefixed minusdescribes the orientation to the bottom edge of the monitor.If the Update Connections function is deactivated, the Extender OSDonly appears when switching via OSD.You have the following options to access the menu:
