Specifications2014-04-15 1957 SpecificationsPos: 130 /806-IHSE/Technische Daten/Schnittstellen/UEB_Schnittstellen @ 5\mod_1278578201870_6.doc @ 42114 @ 2 @ 17.1 InterfacesPos: 131 /806-IHSE/Technische Daten/Schnittstellen/RJ45 (Netzwerk) @ 7\mod_1309942049133_6.doc @ 53692 @ 3 @ 17.1.1 RJ45 (Network)The communication of the Cat X devices requires a 1000BASE-Tconnection.The cabling has to be done according to EIA/TIA-568-B (1000BASE-T)with RJ45 connectors at both ends. All four wire pairs are used in bothdirections. The cabling is suitable for a full duplex operation. For the cableconnection to a source (computer, CPU), a crossed network cable (crosscable) has to be used.Pos: 132 /806-IHSE/Technische Daten/Schnittstellen/RJ45 (seriell) @ 8\mod_1345795550934_6.doc @ 68062 @ 3 @ 17.1.2 RJ45 (Serial)Communication takes place with a transmission speed of 115.2 KBaud,regardless of the file format. The transmission takes place with eight databits and a stop bit, but without a parity bit. Limited hardware handshake(DSR) is possible.Pos: 133 /806-IHSE/Technische Daten/Schnittstellen/RJ45 (Gerätekommunikation) @ 5\mod_1278578339308_6.doc @ 42186 @ 3 @ 17.1.3 RJ45 (Interconnect)Communication of Cat X devices requires a 1000BASE-T connection.Connector wiring must comply with EIA/TIA-568-B (1000BASE-T), withRJ45 connectors at both ends. All four cable wire pairs are used.Pos: 134 /806-IHSE/zz_Layout/Seitenumbruch @ 8\mod_1348581820516_0.doc @ 69462 @ @ 1
