Draco tera172 2014-04-15Pos: 107 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xx/UEB_Bedienung_über_Hotkeys @ 7\mod_1309939558243_6.doc @ 53464 @ 2 @ 16.1 Operation via 'Hot Keys'Pos: 108 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xxC_Direktumschaltung @ 8\mod_1345793277182_6.doc @ 68001 @ 3 @ 16.1.1 Direct SwitchingThe direct switching by favorites on a keyboard is the fastest possibility fora user to switch at his console between different CPUs. This offers theoption to switch video, keyboard and mouse or video only.Direct Switching of Video, Keyboard and Mouse1. Start Command Mode with the 'Hot Key'.Shift and Scroll LEDs on the keyboard will flash, if Command Modeis activated.2. Enter the index number of the new CPU from the list of favorites andconfirm with .At the same time the Command Mode is closed and the console isconnected to the new CPU which takes over complete control.Example: Switching to favorite CPU 7 with video, keyboard andmouse, , <7>, Fastest switching time can be achieved by using identical mice, keyboardsand monitors. This contributes to a smooth and seamless direct switchingof the matrix.Switching in Private Mode1. Start Command Mode with the 'Hot Key'.Shift and Scroll LEDs on the keyboard will flash, if command mode isactivated.2. Enter the index number of the new CPU from the list of favorites andconfirm with , pressed at the same time.At the same time the Command Mode is closed and the console isconnected to the new CPU with complete control in Private Mode.Example: Switching to favorite CPU 3 in Private Mode, , <3>, ,