JAI RMC-4200GE User Manual
                                                                      | |
Contents
| 
RM/TM-4200GE Series12 InstallationFigure 1. 12-Pin Connector Pinouts.Pin #1 is Ground and pin #2 is +12V DC. Table 1 shows the pin-out table.Table 1 12-Pin ConnectorPin Description Pin Description1 GND 7 VD in (CC4 equiv)2 +12V DC 8 Strobe Output3 GND (analog) 9 HD in (CC3 equiv)4 Analog Video out 10 Reserved5 GND (digital) 11 Reserved6 VINIT in (CC1 equiv) 12 Reserved2.2.2 (b) Ethernet ConnectorThe GigE socket, marked on the camera’s back panel as “GigE,” is a standard RJ-45 Ethernet socket as shown inFigure 2.Figure 2. GigE Ethernet ConnectorUse at least Cat5e UTP cables (Cat6 cables are preferred). JAI recommends the use of shielded cables toreduce emissions and for CE/FCC compliance. Double-shielded cables further reduce emissions.2.2.3 Power Supplies and Power Cable Setup2.2.3.1 Power SuppliesThe TM-4200GE camera requires 12V DC power that is obtained through the 12-pin connector located on therear panel of the camera. JAI, Inc. power supplies feature a 100-240V AC/12V DC 1.2A universal voltage powersupply. JAI Inc. recommends the following power supplies:PD-12UU PD-12-UU(No Hirose 12-pin connector) US plugPD-12UUP PD-12UU with 12-pin connector US plugPD-12UE PD-12UU (No Hirose 12-pin connector) European plugPD-12UEP PD-12UU with 12-pin connector European plugFor users providing power through the 12-pin connector, the PD-12P, PD-12UEP and PD-12UUP power suppliesare available with the 12-pin mating connector already attached to the leads from the power supply. The PD-12UU and PD-12UE power supplies can be connected to the JAI Inc. power cable either directly or using aterminal strip. |
Related manuals for JAI RM-4200GE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine