JAI RMC-4200GE User Manual

Contents

JAI RMC-4200GE User Manual Manual pdf 34 page image

RM/TM-4200GE Series34 Functions & OperationsNote: The Mono10, Mono12, BayerGR10, and BayerGR12 settings at full frame rate will exceed GigE bandwidth.It is recommended to use Mono8, BayerGR8, Mono10Packed or Mono12Packed for max frame rate.For TM-4200GE series cameras, the jumbo frame can be set at maximum 16260 Bytes (Factory setting is 1428Bytes). To set Jumbo Frames, refer to section 4.3.4.To ensure the integrity of packets transmitted from the camera it is recommended to follow these simpleguidelines:Whenever possible use a peer-to-peer network.When connecting several cameras going though a network switch, make sure it is capable of handling jumbopackets and that it has sufficient memory capacity.Configure inter-packet delay to avoid congestion in network switches.Disable screen saver and power save functions on computers.Use high performance computers with multi-CPU, hyper-thread and 64-bit CPU, etc.Only use Gigabit Ethernet equipment and components together with the camera.Use at least Cat5e or preferably Cat6 Ethernet cables.Whenever possible, limit the camera output to Mono8, Mono10Packed or Mono12Packed for Monochromecameras, and BayerGR8 for color.4.3.3 Disable FirewallsTo ensure proper operation of the JAI SDK & Control Tool, all firewalls must be disabled. This also includes theWindows firewall.Click [Start], [Control Panel] for accessing the Windowsfirewall configuration.4.3.4 Enabling Jumbo Frames(1) Click [Start] and click [Control Panel].(2) Click [Performance and Maintenance].(3) Click [System].(4) Click [Hardware] tab.(5) Click [Device Manager]