CONTROLS AND CONNECTIONSThe audio section of the EON15 G2 includes powerful features thatenhance the flexibility of your EON15 G2 speakers.ConnectorsINPUT 1This balanced input accepts a standard XLR (female) connector.A broad range of signals (-44 dBu to +20 dBu nominal) frommicrophones, audio mixing consoles, and electronic musicalinstruments may be connected here. When using a single audio inputto the speaker, this is the input to use. The sensitivity of this input iscontrolled by the MIC/LINE SWITCH and the INPUT 1 rotary control.INPUT 2 & INPUT 3These 1/4” phone jacks are intended for use with audio devicesincluding cassette tape, CD, MP3 players, computer sound-cardoutputs, electronic keyboards, and electric/acoustic musicalinstruments. INPUTS 2 and 3 are balanced (TRS) but will acceptunbalanced inputs with no special adapters needed. The level ofthese inputs is controlled by the INPUT 2 and INPUT 3 rotary controls.OUTThis XLR (male) output connector works with the MIX/LOOP SWITCHto provide a method of sending audio from your EON15 G2.SwitchesMIC/LINEThe MIC / LINE switch effects only INPUT 1. It selects between twosensitivity ranges. This switch is used to match the input sensitivityof the EON15 G2 with the output level of the device connected toINPUT 1. Depressing the MIC/LINE switch selects MIC (most sensitive).CAUTION: Before adjusting this switch, be certain to rotate the INPUT1 control fully counter-clockwise. After the MIC/LINE switch has beenadjusted, slowly rotate the INPUT 1 control clock-wise until the desiredvolume has been reached.• Use the MIC position (depressed) when a microphone is connected to INPUT 1.• Use the LINE position (disengaged) when a line level source such as an audio mixing console,audio playback device, or electronic musical instrument is connected to INPUT 1.OUTPEAKSIGNALINPUT123HFEQLFMIX LOOPPUTLINEMIC8