JBL SRX812p User Manual

Also see for SRX812P: User guide Quick start guide

25BACK PANEL LCDJBL SRX815PMAIN0.0channel 1sensitivitY lineINPUT SCREEN0.0MAIN MENUPRESETAUTO DIMAUTO SLEEPMETERS1 MAINOFFONMAIN MENUMAIN MENUPRESETAUTO DIMAUTO SLEEPMETERS1 MAINOFFONPRESETSMAIN MENUPRESETAUTO DIMAUTO SLEEPMETERS2 MONITOROFFOFFAUTO DIMMAIN MENUPRESETAUTO DIMAUTO SLEEPMETERS1 MAINOFFOFFAUTO SLEEPIntroductionThe LCD Screen on the back panel of the speaker allows basic control of the system, as well asaccess to presets and network settings.Plug in the system and power it on. Once the amp boots up, this screen will be displayed. Thisscreen will also be displayed after one minute of inactivity. It can also be accessed by pressingthe Back Button 5 times to exit all menus.1. Speaker Model Name2. Master Attenuator Level. Turn the Master Encoder to adjust between -100 and +123. Main Output Meter4. Preset IndicatorInput ScreenFrom the Home Screen, press either one of the Channel Encoders to access the Input Screen forthe channel. Press the Back Button or wait one minute to return to the Home Screen.1. Channel Indicator. Press the other Channel Encoder to switch channels.2. Input Attenuator Level. Turn the Channel encoder to adjust from -80 to +12.3. Channel Input Meter4. Sensitivity Setting Indicator. Press the Channel Encoder to highlight the setting, then turn toadjust between Line (default,) Consumer, and Mic. Once the desired level is selected, pressthe Channel Encoder down again to set it.Main MenuFrom the Home Screen, press the Master Encoder to access the Main Menu. LoudspeakerSettings and Presets are accessed from the Main MenuPresetsFrom the Main Menu, turn the Master Encoder until “Preset” is highlighted. Press the MasterEncoder to access Presets. Turn the Master Encoder to scroll through Presets and then press theMaster Encoder to select the desired Preset. Once the Preset is selected, you will be returned tothe Main Menu. Hitting the Back Button at any time will also return you to the Main Menu.Auto DimToggling the Auto Dim on and off will determine whether or not the LCD panel on the speakerdims after a minute of not being used.From the Main Menu, turn the Master Encoder until “Auto Dim” is highlighted. Press the MasterEncoder to access Auto Dim. Turn the Master Encoder to toggle between “On” and “Off.”Once thedesired setting is displayed, press the master encoder to select that setting; you will be returnedto the Main Menu. Hitting the Back Button at any time will also return you to the Main Menu.Auto SleepToggling the Auto Sleep on or off will determine whether or not the speaker goes into SleepMode after a period of time. In Sleep Mode, the outputs will be completely turned off so that anyspurious outside noise such as radio signals will not be passed through the system. The speakerwill come out of sleep mode as soon as audio is passed through the system again.From the Main Menu, turn the Master Encoder until “Auto Sleep” is highlighted. Press the MasterEncoder to access Auto Sleep. Turn the Master Encoder to toggle between “On” and “Off.”Oncethe desired setting is displayed, press the master encoder to select that setting; you will bereturned to the Main Menu. Hitting the Back Button at any time will also return you to theMain Menu.11442332