JBL SRX812p User Manual

Also see for SRX812P: User guide Quick start guide

Please visit jblpro.com/SRX800 for complete documentation.JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2015 Harman International Industries, IncorporatedPART NUMBER: 5056239your audio source. Turn CH1 and/or CH2Encoders to the left until the level reads “-80.0” on the LCD.2. Connect XLR or TRS cable from audiosource to CH1 and/or CH2 Inputs.3. Select LINE, CONSUMER or MIC gainsetting by pushing the correct CHANNELENCODER twice. You will see a rectanglehighlighting the sensitivity setting. Simplyroll the encoder left or right to select thecorrect setting. Once the correct settingis shown, push the encoder one more timeto make your selection.SET OUTPUT LEVEL1. Set the gain level for each input using theCH1 and/or CH2 ENCODER. The input levelmeter on the LCD will allow you to monitoryour input level.2. Once the input level is set, user theMASTER ENCODER to turn up (Right) orturn down (Left) the overall level until thedesired volume is reached.POWER IT ON1. Connect the supplied power cord to the BlueIEC inlet on the rear of the speaker2. Connect the power cord to an availablepower outlet. Once the power cord is pluggedinto the power source, the Green Power LEDwill illuminate.3. Once the Green Power LED illuminates, pressthe Power Button. After several seconds,you will notice the LCD Screen boot and youwill now be on the main screen.PLUG IN THE INPUTS1. The CH1 and CH2 Input levels and MasterLevel default to 0dB. It’s a good idea to turnthe inputs down all the way before plugging inB A C K P A N E LOUTINCH2CH 1OUTMIX OUTNETWORKLINKMASTER LEVELBACKPOWERDATAINA HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USAMADE IN MEXICOSERIAL NO. JBL PROFESSIONAL NORTHRIDGE, CA USAMAIN MENUPRESETAUTO DIMAUTO SLEEPMETERS2 MAINOFFONPower ButtonCH1 Direct OutCH2 Direct OutCH1 InputCH2 InputCH1 EncoderCH2 EncoderLocking IEC InletPower LEDLCD ScreenMaster EncoderBack ButtonMix OutEthercon ConnectorData LEDLink LED