JCM Part No. 960-000097R_Rev. 3 © 2010, JCM American, Corporation6 - 1UBA® SeriesUniversal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU)S e c t i o n 6This section provides Flash Memory DownloadProgramming, Calibration, and Performance Test-ing instructions for the Universal Bill Acceptor(UBA) Series. This section contains the followinginformation:• Workbench Tool Requirements• Software Download Preparation• Software Downloading Procedure• Programming Instructions• Calibration Procedures• Performance TestsWorkbench Tool RequirementsThe following tools are required to perform aWorkbench Software Download (See Figure 6-2):• JCM Universal Bill Acceptor (UBA)• JCM External Power Supply (Part No. 701-000148) or equivalent• PC containing a USB port (OS: Windows2000/XP)• USB Cable (A type Male to B Type Male)(See Figure 6-1).• The latest .ZIP compressed UBA DownloadProgram (V1.11 or later).Software Download PreparationThe following instructions describe how to decom-press and store a downloaded program onto apersonal computer (PC) for eventual installationinto the Universal Bill Acceptor:1. Refer to the Figure 6-2 interconnectiondiagram to properly connect the variouscables and wiring harnesses to the UBA.6 PROGRAMMING, CALIBRATION & TESTFigure 6-1 Download USB Cable RequirementFigure 6-2 Required Download Workbench Tools
